With Us Heating Means Saving...

  • pl
  • en
  • ru
  • ua
  • de
  • fr
  • lt
  • ro
  • hr
Facebook Twitter Facebook
New cwd heating boiler controllers EcoLogic with a better dedicated operation algorithm .
15.02.2021

New cwd heating boiler controllers EcoLogic with a better dedicated operation algorithm .

New cwd heating boiler controllers EcoLogic with a better dedicated operation algorithm .

 

The new controllers of our biomass and pellet boilers now have a clearer display as well as many new or modified functions.

Here are the most important of them:

Adaptive control algorithm - the controller analyzes changes in the state of the thermostat input and, based on them, automatically determines the preset boiler temperature.

Service of the mixing valve in the standard version

Controlling the CH circulation pump and the DHW tank loading pump - the controller in the basic version enables the control of the central heating pump and the DHW loading pump. In summer, it is possible to turn off the circulation pump and heat only utility water. When the DHW pump is not used, it is possible to control the pump that mixes the return water.

Support for two or more heating circuits, e.g. underfloor heating.

Cooperation with two room thermostats - with a daily program in two different zones of the building (or floors) Easy operation of the controller - all the most frequently used functions are available directly on the front panel of the controller and allow for simple and intuitive operation

Graphic LCD display - the operation of devices connected to the regulator and changes to the set values ​​are indicated on the graphic LCD display. In order to facilitate operation, the programming functions have been divided into user and service modes.

Selection of the pellet or biomass type - the RK-2006SPGM regulator enables setting combustion parameters for four types of fuel. The possibility of burning wood in the Sigma dual boilers. - if the WOOD fuel type is set, you can burn wood in the pellet boiler - the controller works with the settings for wood burning. Setting WOOD / PELLET in the Sigma dual combi boiler causes that after the wood has been burnt in the boiler, the controller switches to pellet combustion and performs full operation of the pellet boiler. Precise regulation of the fuel-air dose - in the mode available to the user, it is possible to precisely set the parameters of the feeder.

Automatic cleaning of the burner - the controller enables the operation of Belimo servos used by our company for mechanical cleaning of the furnace Flame detection-CT-1/2, PT-1000, FD-1-Flame detection can be performed in two ways: measuring the temperature of the burner or measuring the amount of light.

Automatic fuel ignition - the regulator automatically controls the electric fuel ignition system.

Extensive service functions - extensive programming options in the service mode allow you to adjust all important parameters of the boiler operation to the heating system.

Simple programming makes operation much easier.

Precise regulation of the fan operation - the controller enables appropriate adjustment of the fan operation parameters to the heating system by selecting the maximum power and setting the speed range. The reservoir heating function, i.e. the Lagionella function - enables the elimination of harmful microorganisms - Legionella - after heating the tap water to a temperature of 75 ° C, the controller automatically switches to normal operation. Feeder temperature sensor - protecting against backfire - allowing to control the feeder temperature, and in case of exceeding the programmed temperature, it starts the extinguishing process.

Protection against opening the charging hopper door during operation of the device - the regulator has a safety input that allows you to control the opening of the charging hopper door. This input can also be used to control the feeder motor overload.

Self-diagnosis sensors are standard equipment

Self-diagnosis of the regulator's sensors - the regulator automatically checks the correct operation of sensors and internal systems, and in the event of a failure, it takes appropriate measures to protect the boiler. Testing external outputs - allows you to easily check the correct operation of all connected devices.

Lack of fuel and overheating indicator - in the absence of fuel and overheating, the appropriate indicator lights up.

Data transmission - the parameter allows you to select the functions performed by the data connector ·

Our internet page use "cookies" , please change browse setting if You don't want to use them.

Zamknij